Graham · Washington · Made in North America
Metal roofing in Graham, WA
18 Interlock® aluminum roofs installed in Graham since 1998, by Interlock Metal Roofing (PNW) Inc., the certified and exclusive Interlock® roofing contractor in Washington, Oregon and Idaho. One roofing system, made in North America, with a written price after your roof consultation.
- Roofs in Graham
- 18
- First Graham roof
- 1998
- Since 2020
- 1
- Most chosen
- Mediterranean Tile
From our job book: completed, published jobs. 28 years of Graham roofs.
Our job book records 18 completed Interlock® roofs in Graham, from 1998 to 2021, 1 of them since 2020. 17% of them are Slate, against 22% across Washington: Graham homeowners choose other profiles more often.
What Graham homeowners choose
Interlock® profiles on Graham homes in our job book.
Mediterranean Tile
6 roofsOriginal Shingle
5 roofsSlate
3 roofsShake
2 roofsCedar Shingle
1 roof
Most common colors in Graham: Charcoal Grey, Tile Red, Shadow Grey, Aged Copper.
Every Graham roof on the map
Each pin is a completed Interlock® roof with its profile, color and install year.
Graham roofs we've installed
What Graham homeowners say
“Of the five name brand roofing contractors I screened for this project I chose Interlock and I am very pleased with the roof. Coordination and communication was critical especially since Interlock was to perform the installation immediately following another contractor performing a siding replacement.”
“Most of the other contractors had out that I was screening for the project covered a lot more as far as the structure and insulation as well as how the roof was a system as a whole and not just a shell. I didn't get as much information from Interlock.”
“I recommended someone. There was a rot in a board in my roof; the installation crew did not replace it and did not mention anything to me. I spoke to the instillation manager, Randal, and he said that the installation person would come back(This was a week ago).Ten minutes ago, I tried to call him and he did not answer. I am still trying to contact Randal, to replace the rotten wood. I am going to try to recommend people when ever I can; everyone asks about my roof when they see it.”
“We are completly satisfied with the work and love our new roof. If you have any doughts about spending the money on this roof don't think twice, it is well worth the money. I wasn't there at the time”
Roofing in Graham: what to plan for
Why Puget Sound roofs keep getting replaced
A long wet season, shade from the firs and summer sun work on asphalt shingles every year: moss lifts the tabs, granules wash into the gutters and edges curl. Cedar shakes take on water and split. An Interlock roof has no granules to lose and nothing for moss to root into, and its panels lock to each other on all four sides.
The look of slate or cedar, without the weight
Interlock's Slate, Cedar Shingle and Shake profiles keep the look on a Craftsman, a Tudor, a Victorian or a mid-century home at roughly 0.4 to 0.7 lb per square foot, a fraction of natural slate. In a historic district, check with your local historic landmarks commission first; we bring samples and product documents to that conversation.
Built for salt air and winter wind
On Puget Sound, Hood Canal, the islands and the Strait, salt air corrodes steel fasteners and coated-steel roofing; aluminum cannot rust. Winter storms hit shoreline roofs hardest; Interlock panels lock on four sides with the fasteners concealed, and wind resistance is warranted to 120 mph installed to manufacturer specification.
One installer, since 1997
We plan, price and install every roof ourselves, under Washington State Contractor Registration #INTERMR75406. The manufacturer's Guardian Lifetime Limited Material Warranty comes with it, our 10 Year Limited Labor Warranty covers the installation, and our teams work from Seattle, Bellingham and Stanwood.
Graham metal roofing questions
How many roofs has Interlock installed in Graham, WA?
18 completed Interlock® roofs in Graham are recorded in our job book, the first in 1998 and 1 of them since 2020.
Which roof profile do Graham homeowners choose most?
Mediterranean Tile. In Graham the profiles on our books are Mediterranean Tile (6), Original Shingle (5), Slate (3), Shake (2), Cedar Shingle (1). The most common colors are Charcoal Grey, Tile Red, Shadow Grey.
Who installs Interlock roofs in Graham, WA?
Interlock Metal Roofing (PNW) Inc., the certified and exclusive Interlock® roofing contractor in Washington, Oregon and Idaho, in business since 1997. Our Washington team works from our Seattle, Bellingham and Stanwood offices. The Interlock® aluminum roofing system is made in North America by Interlock Roofing.
Are you licensed to work in Washington?
Yes. Interlock Metal Roofing (PNW) Inc. is registered with the Washington Department of Labor & Industries, State Contractor Registration (L&I) #INTERMR75406; Washington registration requires a bond and insurance. You can check it with Washington L&I “Verify a Contractor”. We are insured and BBB A+ accredited since November 3, 2011. For homes built before 1978 we also hold the Washington Lead-Based Paint Renovation (RRP) Firm Certification, R7896.
How do I get a price for a roof in Graham, WA?
Book a free roof consultation. We measure the roof and go through profiles and colors with you, and you get a written price after your roof consultation. Call (206) 589-8423 or use the quote form.
Hiring anyone for a Graham roof? Six checks to make sure a roofer is really local →
More Washington towns we roof
- Seattle · 416
- Tacoma · 184
- Vancouver · 95
- Bremerton · 90
- Everett · 85
- Kent · 83
- Oak Harbor · 72
- Olympia · 71
- Renton · 70
- Federal Way · 62
- Lynnwood · 60
- Bellevue · 58
Metal roofing across Washington →
Guides for Graham homeowners
Your Graham roof, priced in writing.
Interlock Metal Roofing (PNW) Inc. · 5608 17th Ave NW, Suite 1574, Seattle, WA 98107-5232
